Int One Mk.II
Integrated Amplifier
Alluxity by VA
Clarity, Power, Restraint.
Three words that capture the Int One Mk.II — and a hint of what this integrated amplifier brings to the listener. A complete preamplifier and power amplifier in a single, beautifully resolved chassis, the Int One Mk.II is the most direct route into the Vitus Audio family, and proof that an entry point need ask for no apology.
It carries the Vitus Audio engineering pedigree in a distinctly modern form. The chassis is milled from a single billet of aluminium, the styling pared back to essentials, and a 5-inch colour touchscreen places every setting and status readout directly to hand. Compact enough to sit comfortably in shelving or cabinetry, it will happily hold the heart of your system for a lifetime.
Everything in one place
The Int One Mk.II brings the performance of a separate preamplifier and power amplifier into a single chassis, with no compromise asked of either. Three RCA (unbalanced) and two XLR (balanced) inputs accommodate the analogue sources in your system, with a single RCA pre-out on hand should you wish to expand. With substantial reserves of power and current on tap, it drives demanding loudspeakers with the ease and authority that defines every Vitus design — equally at home translating the full weight of an orchestra or the intimacy of a solo voice.
The signal path is fully linear and solid state throughout, with discrete gain stages designed and built in-house. There is no switching, no Class-D, and nothing in the audio path that does not serve the music. What you hear is the result of careful, considered engineering, presented through an interface that is as effortless to live with as the amplifier is to listen to.
Finishing
The Int One Mk.II comes in Pure White or Jet Black as standard. Titanium Orange and Titanium Grey are our most popular unique finishes.
Pure White
Standard colour
Jet Black
Standard colour
Titanium Orange
Unique colour
Titanium Grey
Unique colour
Technical specifications
| Input | XLR analogue | RCA analogue |
|---|---|---|
| Available | 2 (L+R) | 3 (L+R) |
| Sensitivity | 4 VRMS | 2 VRMS |
| Impedance | 10kΩ | 10kΩ |
| OUTPUT (Each Ch.) | Speaker | Pre/Tape out |
|---|---|---|
| Available | 1 set balanced | 1(RCA) |
| Impedance | 0.075Ω | 0Ω |
| Power WRMS (8Ω) | ~200W Class AB | |
| Bandwidth | +800kHz | |
| Signal to noise ratio | >100dB @ 1kHz | |
| THD + noise | 0.01% @ 100W / 1kHz |
| Volume Control | |
|---|---|
| Type | Relay controlled fixed resistor network |
| Steps | -79dB to +13dB in 1dB steps |
| POWER CONSUMPTION | |
|---|---|
| Standby | <1W |
| Operation | 60W (no load) |
| Dimensions | |
|---|---|
| Height | 105mm including feet |
| Width | 435mm |
| Depth | 335mm (with connectors) |
| Weight | |
| Material | Aluminium for body parts |
